more about non-intrusive flowmeters
refinery flow meters 
FLEXIM's WaveInjector is engineered for flow measurement at high temperatures- together with the FLUXUS ADM flowmeter, it is the ideal solution for refinery applications
english français german italiano español russian american
 

The Future has Begun.
Home
Non-intrusive
flow meters
 
Clamp-on
Advantages
Facts
 
Applications
Heat transfer oil
Coker /
visbreaker feed
Bitumen at an
oil sand facility
Overflash
mass flow
Heavy
gasoil
Bitumen
at 700°F
Hot pitch during distillation
Fluidized
Catalytic Cracker
Service
 
Products
WaveInjector®
Flow meters
 
FLEXIM
Contact
Impressum
 

WaveInjector®

The WaveInjector® is a special transducer mounting fixture which makes it possible to use standard ultrasonic flow transducers at extreme temperatures.

Temperature range: -260 °F to 750 °F
Diameter range: 1.6 in to 39 in
Material: Stainless steel
Hazardous area classification: Since the WaveInjector® is a purely mechanical device, it can be used without any further certification in explosion hazard areas.
productdata1

The transducers

All FLEXIM transducers are calibrated as a pair at the works. The calibration can be traced back to national and international standards. The calibration data and the transducer parameters are permanently stored in the transducers themselves. An extended calibration can be carried out on demand.

Operating temperature,
standard transducers:		 -40 °F to 266 °F
Operating temperature,
high temperature transducers: 		-40 °F to 392 °F
Operating temperature
with WaveInjector®:		 up to 750 °F
Degree of protection
acc. to EN 60529:		 IP65, IP67 or IP68 depending on type (EN60529); NEMA 4X
Material: Stainless steel or PEEK with stainless steel protective cap
Hazardous area classification: FM Class I Div II and ATEX zone 1 & 2 types available
productdata2

The matched FLUXUS® flowmeters:

FLUXUS® F601.
The portable meter.
Operating temperature: -15 °F to 140 °F
Flow channels: 2
Degree of protection: Transmitter: IP65 acc. EN60529
Transport case: IP67 acc. EN60529
productdata3

FLUXUS® ADM 7407/7907.
The multi-function meters.
Operating temperature: -15 °F to 140 °F
Flow channels: 1 or 2
Degree of protection acc to EN60529: ADM 7407: IP65; NEMA 4X,
ADM 7907: IP20; NEMA 1
Hazardous area classification: F7407: IP65, F7907: IP20,
ATEX Zone 2 or FM Class I Div II optional
productdata4

FLUXUS® ADM 8027/8127.
The explosion-proof experts.
Operating temperature: ADM 8027: -4 °F to 140 °F;
ADM 8127: -4 °F to 120 °F
Flow channels: 1 or 2
Degree of protection: NEMA 4X; IP66 acc. to EN60529
Hazardous area classification: ATEX zones 1 & 2
productdata5
< back | next >